Instruction Manual

341

Clip Muting and Isolating (Clip Soloing)

Arranging

A. Muted area of clip

To Unmute a Time Range Using Default Style

1. Make sure that Mute Time Ranges under Click+Drag Behavior in the

Mute tool dropdown menu has a check mark.

2. Using the Mute tool, click inside the upper half of a clip in the muted

area.

To Mute or Unmute an Entire Clip Using Default Style

1. Make sure that Mute Time Ranges under Click+Drag Behavior in the

Mute tool dropdown menu has a check mark.

2. Using the Mute tool, Alt-click anywhere in the clip (hold down the Alt key

while you click).

When a clip is currently muted, SONAR displays the Mute icon in the upper

left corner of the clip.

A. Mute icon

Note: if the clip you’re muting or unmuting with this method already has one

or more muted time ranges, these time ranges remain muted while you Alt-

click the clip, so you don’t lose any precise mute edits you’ve performed. To

completely unmute the clip in the picture below, first Alt-click the clip to

remove the Mute icon, and then drag through the upper half of the clip in the

muted area(s).