Instruction Manual

390 AudioSnap
Groove Quantize and Quantize to Pool
When you use the groove quantize command, you can align a clip with a
pre-existing groove, or you can extract a groove from another clip.
To Extract a Groove
1. Select the clip that you want to extract a groove from.
2. Disable any transient markers that you want to exclude from the groove
(use the two sliders in the palette, or right-click the ones you want to
disable).
3. Add the clip’s markers to the Pool by enabling the Add Transients to
Pool button while the clip is selected.
4. In the AudioSnap palette, click the Extract Groove radio button, which
displays the Save As Groove button.
5. Click the Save As Groove button. The Define Groove dialog appears.
6. In the File field, choose a file to save the pattern in, or type a name to
create a new file.
7. In the Pattern field, type a name for the pattern, and click OK.
To Groove Quantize an Audio Clip
1. Select the AudioSnap-enabled clip that you want to groove quantize.
2. In the AudioSnap palette, click the Quantize radio button, which
displays the Groove Quantize button.
3. Click the Groove Quantize button. The Groove Quantize dialog
appears.
4. In the Groove File field, select the file that the groove pattern you want
to use is saved in.
5. In the Groove Pattern field, select the groove pattern that you want to
use.
6. Select the Resolution value that you want to quantize to.
7. Make sure that the AudioSnap Beats check box is enabled.
8. Click OK.
To Quantize to the Pool
1. Select the AudioSnap-enabled clip or clips that you want to include in
the pool.