Instruction Manual

413
Working with Groove Clips
Using Loops
To Adjust a Groove Clip Slice Pan
1. In the Loop Construction view, select the slice on which you want to
adjust the pan.
2. In the Slice Pan field, click the plus or minus buttons to change the pan
value. Negative is Left pan and positive is right pan.
To Adjust a Groove Clip Slice Pitch (Half Steps)
1. In the Loop Construction view, select the slice on which you want to
adjust the pitch.
2. In the first Slice Pitch field, click the plus or minus buttons to change the
pitch value.
To Adjust a Groove Clip Slice Pitch (Cents)
1. In the Loop Construction view, select the slice on which you want to
adjust the pitch.
2. In the second Slice Pitch field, click the plus or minus buttons to change
the pitch value.
To Adjust Slice Gain, Pan and Pitch Using Slice
Envelopes
You can change an envelope’s gain, pan and/or pitch settings by dragging
the envelope up or down in that slice.
Saving Groove Clips as Wave Files/ACIDized
Wave Files
Once you have created a Groove clip in SONAR, you can save the clip as a
Groove Clip/Wave file, compatible with ACIDized wave files.
To Save a Groove Clip as a Riff Wave File/ACIDized
Wave File
1. If you have not already done so, create a Groove clip. See Creating and
Editing Groove Clips.
2. In the Loop Construction view, click the Save icon.
The Save As dialog appears.
3. Use the toolbar in the Save As dialog to navigate to the location where
you want to save the file.
4. In the File name field, enter a name for the file.
5. Click the Save button.