Instruction Manual

453
Selecting and Editing Events
Editing MIDI Events and Controllers
selection starts at 2:01:000, you cannot slide events earlier by more
than one measure.
5. Click OK when you are done.
SONAR shifts the selected events and/or markers. You can also use the
Process-Nudge command to move events. See Nudge for more
information.
Inserting Time or Measures into a Project
The Insert-Time/Measures command lets you insert any number of blank
measures, ticks, seconds, or frames into a project. You can insert the blank
measures (or other period of time) into all tracks or into one or more
selected tracks. If you insert the blank time into the entire project, all events
in each track—markers, meter and key settings, and tempo changes—are
shifted automatically by default. If you insert the blank time into one or more
selected tracks, only the events in those tracks are shifted by default. You
can always choose which types of events should be shifted.
To Insert a Single Blank Measure into a Project
1. Press Ctrl+Shift+A or select Edit-Select-None to make sure that no
track or time range is selected.
2. Set the Now time to the place where you want to insert the measure.
3. Choose Insert-Time/Measures to display the Insert Time/Measures
dialog box.
4. Verify that the settings are correct and click OK.
SONAR inserts a blank measure at the Now time.