Instruction Manual

468 Editing MIDI Events and Controllers
Changing the Timing of a Recording
To Define a New Groove
1. Select the music that defines the groove using any of the selection tools
and commands.
2. Choose Edit-Copy to place the music onto the Windows clipboard.
You can now use the Groove Quantize command with the clipboard as the
“Groove File.”
To Save a Groove Pattern
1. Select the music that defines the groove using any of the selection tools
and commands.
2. Choose Edit-Copy to place the music onto the Windows clipboard.
3. Choose Process-Groove Quantize to display the Groove Quantize
dialog box.
4. Choose the Clipboard as the groove “Groove File.”
5. Click the Define button to display the Define Groove dialog box.
6. Select an existing groove file, or enter the name for a new groove file.
7. Enter a pattern name, or choose an existing pattern to replace.
8. Click OK.
9. If you are replacing a groove, verify that you want to delete the existing
version.
10. Click Close when you are done to return to the Groove Quantize dialog
box.
SONAR stores the groove in the file and chooses the new groove as the
current groove source.