Instruction Manual

482 Editing MIDI Events and Controllers
Controllers, RPNs, NRPNs, and Automation Data
A few examples will illustrate some of the many uses of the Process-
Interpolate command. These examples apply to the note event type,
though the command can be used on any type of event.
Controllers, RPNs, NRPNs, and
Parameter... Search
range...
Replace-
ment
range...
Effect...
Pitch (key) From C2 to C4 From C4 to C6 Transposes all notes in the
search range up two octaves
Pitch From E2 to E2 From Eb2 to
Eb2
Converts all Es in octave 2 to
Eb in the same octave
Pitch From E? to E? From Eb? to
Eb?
Converts all Es in all octaves
to Eb in the same octave
Pitch From E? to E? From E? to Eb5 Converts all Es to Eb in
octave 5
Pitch From C1 to C8 From C8 to C1 Inverts all the notes in the
specified range
Velocity From 0 to 127 From 80 to 127 Compresses the velocity
values into a narrower range
Velocity From 0 to 127 From 127 to 0 Inverts the velocity values
(makes loud notes soft, and
soft notes loud)
Duration From 0:01:00
to 0:02:000
From 0:01:000
to 0:01:000
Converts all notes that are
between a quarter note and
half note in length, and
makes them all quarter notes
Channel From 1 to 1 From 2 to 2 Changes all events on MIDI
channel 1 to MIDI channel 2
Channel From 1 to 16 From 4 to 4 Reassigns all events to MIDI
channel 4