Instruction Manual

502 Editing MIDI Events and Controllers
MIDI Effects (MIDI Plug-ins)
Changing Velocities with the Velocity Effect
The Velocity effect lets you adjust velocities of MIDI notes. You can set
velocity values, set scale values, add specific or random offsets, create
smooth transitions, and limit the velocity range.
The velocity effect options are as follows:
To Change Note Velocities
1. Select the data to be affected.
2. Choose MIDI Effects-Cakewalk FX-Velocity from the Process menu
or from the popup menu to open the Velocity dialog box.
3. Select options as described in the table above.
4. Click OK.
Parameter/
Option...
Meaning...
Set all velocities to X Sets all velocities to the specified value.
Change velocities by
X
Adds a specified increment to all velocities.
Scale velocities to X%
of their current value
Multiplies all velocities by a constant factor.
Change gradually
from X to Y
Creates a smooth velocity change across the
selection.
Change gradually
from X% to Y%
Scales velocities by a gradually changing factor.
Limit range from X to
Y
Brings all velocities into the specified range.
Randomize by +/- X Adds or subtracts a random offset from each
velocity. You must also specify the maximum
offset. You can select this option in addition to one
of the previous options.
Tendency The tendency of the random offset to be lower or
higher, on a scale from -10 to 10.