Instruction Manual

508 Drum Maps and the Drum Grid Pane
Creating and Editing a Drum Map
• Out Note—The MIDI note value that plays on the destination sound
source.
• Name—The user-defined name for the row.
• Chn—The channel on which the note is transmitted.
• Out Port—The hardware output port or software virtual output port to
which you are sending the note.
• Vel+—Apply a velocity offset setting to an individual mapped pitch.
• V Scale—The V Scale value sets a level of compression or expansion.
A value below 100% is compression. A value above 100% is
expansion. The Vel+ setting allows for gain make-up.
Ports and Channels
This section lists each unique Port and Channel pairing. This allows you to
make quick global changes that Port and Channel pairing’s bank and patch
settings.
See:
Working in the Drum Map Manager
Working in the Drum Map Manager
The following table lists several ways of editing settings in the Drum Map
Manager.
To do this… Do this…
Audition a row Select the row and press
Shift+Spacebar
Sort rows Drag and drop a row to a new
location
Select multiple rows Click a row, hold down the Ctrl key
while selecting additional rows
Change the Output Port for all
rows with the same Channel/
Port
Press Ctrl+Shift while changing the
port.
Undo an edit Press the Undo button