Instruction Manual

524 Editing Audio
Digital Audio Fundamentals
See:
Basic Acoustics
Example—A Guitar String
Waveforms
Recording a Sound
The Decibel Scale
Audio Clips
Managing Audio Data
Basic Acoustics
Sound is produced when molecules in the air are disturbed by some type of
motion produced by a vibrating object. This object, which might be a guitar
string, human vocal cord, or a garbage can, is set into motion because
energy is applied to it. The guitar string is struck by a pick or finger, while
the garbage can is hit perhaps by a hammer, but the basic result is the
same: they both begin to vibrate. The rate and amount of vibration is critical
to our perception of the sound. If it is not fast enough or strong enough, we
won't hear it. But if the vibration occurs at least twenty times a second and
the molecules in the air are moved enough, then we will hear sound.
See:
Digital Audio Fundamentals
Example—A Guitar String
To understand the process better, let's take a closer look at a guitar string.
When a finger picks a guitar string, the entire string starts to move back and
forth at a certain rate. This rate is called the frequency of the vibration.
Because a single back and forth motion is called a cycle, we use a
measure of frequency called cycles per second, or cps. This measure is
also known as Hertz, abbreviated Hz. Often the frequency of vibration of an
object is very fast, so we can also express the frequency in thousands of
cycles per second, or kilohertz (abbreviated kHz)