Instruction Manual

53
Setup
Introduction
To Connect an Electric Guitar or Keyboard to Your
Computer
If your sound card has a 1/8 inch input jack (built-in sound cards that
come with your PC usually do), plug your 1/4” mono guitar or audio
cable into a 1/8” stereo adapter, and then plug the 1/8” adapter into the
microphone input or line input jack on your computer sound card. If you
are connecting a keyboard, the audio cable must go from the
keyboard’s audio out or line out jack to the sound card input jack. 1/8”
stereo adapters are available at consumer electronic supply stores.
Or
If you use a professional or “prosumer” sound card, there is probably a
1/4 inch input jack on your sound card or audio hardware interface that
you can plug your guitar cable or audio cable into.
To Connect a Microphone to Your Computer
If your sound card has a 1/8 inch input jack (built-in sound cards that
come with your PC usually do), and your microphone cable has a 1/4”
plug on the end, plug the mic cable into a 1/8” stereo adapter, and then
plug the 1/8” adapter into the microphone input jack on your computer
sound card. 1/8” stereo adapters are available at consumer electronic
supply stores.
If you use a professional or “prosumer” sound card, there is probably a
1/4 inch input jack on your sound card or audio hardware interface that
you can plug your mic cable into.
If your mic has a cable with an XLR plug on the end, and your sound
card or audio hardware interface has a 1/4 inch input jack, plug the mic
cable into an XLR-to-quarter inch adapter, and then plug your mic cable
into your audio hardware. If your audio hardware has an XLR input, of
course it’s better to use that.
You can also plug your mic into a mixer or pre-amp, and connect the
mixer or pre-amp to an input jack on your audio hardware. This is
usually the best method.
That's it! Now that your instruments are all set to go, you can restart your
computer and turn on your keyboard, guitar, and microphone.
For a complete description of audio input options, see the online help topic
“Hardware Setup.”
Next topic: MIDI Connections