Instruction Manual

583

Preparing to Mix

Mixing

A. Gain B. Band Q C. Band select D. EQ type select E. EQ enable F. Frequency

Sound controls in the Console view are grouped in modules. There are

several types of modules:

Module

type...

What you can do...

MIDI track Set the track’s output, channel, bank, and patch; set the

input; mute, solo, and arm the track; set channel

volume, panning, chorus, and reverb levels; add real-

time effects

Audio track Set the track’s output (bus or Main out destination);

choose an input; monitor input levels; mute, solo, and

arm the track; set track volume and panning; add real-

time effects; send audio data to buses or main outs.

Synth track Set the track’s output (bus or Main out destination); set

the input; mute and solo the track; set track volume and

panning; add real-time effects; send audio data to buses

or main outs.

Bus Receive input from one or more audio tracks, add real-

time effects, and send the results to a main out or

another bus

Main outs Monitor output levels using meters and control the

stereo volume of audio to an output on your audio

interface. To adjust both the left and right volume levels

at the same time, use the Link button for that

module.