Instruction Manual

587
Preparing to Mix
Mixing
To Change a Meter’s Range
• Right-click on the meter and choose a new range.
To Add a Bus
1. Right-click in the Bus pane (to add a bus at the end of the current
buses) or over an existing bus (to add a bus before it).
2. Select Insert Stereo Bus or Insert Surround Bus from the menu that
appears.
A bus appears in the Bus pane.
To Delete a Bus
1. Right-click in the Bus pane over an existing bus.
2. Select Delete Bus from the menu that appears.
The bus is deleted from the Bus pane.
Note: If you have any track or bus routed through the bus you delete, the
signal will be rerouted to the deleted bus’s output.
To Create a Bus Send in a Track
1. Right-click in an empty part of the Track pane (Track view) or a track
module (Console view).
2. Select Insert Send for a list of buses available.
3. Select a bus from the list.
To Set the Snap-to Position of a Knob or Fader
1. Set the control to the desired position.
2. Right-click on the control and choose Value-Set Snap-To=Current.
From now on, the control returns to this position when double-clicked.
To Inser t a New Track
1. Right-click in the Console view or on the header of a track in the Track
view.
2. Choose Insert Audio Track or Insert MIDI Track.
SONAR adds a new track to the project.
To Rename a Track or Bus
1. In the Console view, click on the module name. In the Track view
double-click on the Track name.
2. Type a new name.