Instruction Manual

593
Signal Flow
Mixing
SONAR displays volume in dB (decibels). When adjusting the volume or
bus send level controls, a value of 0 dB indicates full signal strength;
positive values, up to 6 dB, indicate a signal gain; negative values indicate
an attenuated signal. When you move the Pan control, the Value box
displays the pan value on a scale that ranges from 100%L (hard left)
100%R (hard right).
See also:
Sidechaining Signal Flow
External Insert signal flow
Sidechaining Signal Flow
See also:
Sidechaining
Signal Flow
External Insert signal flow
Routing and Mixing Digital Audio
Any audio track can be tapped, before or after the track volume control, and
sent to one or more buses. A bus can tap any number of audio tracks. Each
track’s data passes through the track’s send level knob on its way to the
bus. This is shown in the diagram below:
Track 1
Output
Track 1 FX Bin
Track 2
Output / Send
Bus
Output / Send
FX
Sidechainable FX
Hardware
Output
Sum
Sidechain input
Bus