Instruction Manual

595
Signal Flow
Mixing
See:
Main Outs
Signal Flow
Stereo Buses
Stereo Buses
Buses are useful for mixing together different audio tracks (in stereo) and
applying effects to the mix. You can mix the tracks at different volume levels
by adjusting each track’s bus send level. Buses output to either other buses
or to a main out.
You control the bus as follows:
To do this... Do this...
Send audio data from an audio
track to the bus
In an audio track, press the Bus Send Enable
button corresponding to the bus, or choose the
bus as an output for the track. If the track
doesn’t have a Send module, you can insert
one by right-clicking the track and choosing
Insert-Send-[name of bus you want the
data to go to].
Send audio data from a bus to
another bus
If the bus doesn’t have a Send module, you
can insert one by right-clicking the bus and
choosing Insert-Send-[name of bus you
want the data to go to]. Then click the Bus
Send Enable button so that it’s green, and
adjust the Bus Send Level and Bus Send Pan.
Set the level of the audio data
sent to the bus
In an audio track, set the Bus Send Level
corresponding to the bus, or volume fader if
the output is to the bus
Set the pan of the audio data sent
to the bus
Adjust the Bus Send Pan knob
Set the input level to the bus Adjust the Input gain on the bus itself
Set the input panning to the bus Adjust the Input pan on the bus itself