Instruction Manual

605
Waveform Preview for Buses and Synth Tracks
Mixing
playback. Peak Markers appear in two different colors: one color if the peak
is below 0 dB, and a different color if the peak is above 0dB. By default,
peaks below 0dB will be green, and peaks above 0dB will be red. Colors for
both Peak Markers and their text fields are configurable in the Configure
Colors dialog (Options-Colors command).
To Hide or Show Peak Markers Globally
• Click the Meter Options dropdown arrow in the Track view toolbar,
and choose Show Track Peak Markers and/or Show Bus Peak
Markers.
To Hide or Show Peak Markers on an Individual Track
or Bus
• Right-click the track or bus, and choose Show Peak Marker from the
popup menu.
To Jump to a Peak Marker
• Right-click the numeric peak display in the track/bus header strip, and
choose Go To Peak from the context menu (see picture below). Doing
so will center the peak location and Now time in the Clips pane. This is
useful because a Peak Marker may be offscreen.
To Hide or Show the Numeric Peak Display
• Click Show Numeric Peak Values in the Meter Options menu.
To Clear Peak Markers From a Track
• Double-click the meter.
Waveform Preview for Buses and Synth
Peak marker