Instruction Manual

629
Using V-Vocal
Mixing
• You can undo each edit you do by pressing Ctrl+Z. You can use this
command repeatedly to undo multiple edits.
About Pitch Correction
The key for making manipulated sound more natural is using the
parameters in the Pitch Correction section: Note, Vibrato and Sense.
Functions for each parameter are as follows:
• Note—controls the ratio of pitch shifting to the nearest scale note. With
a value of 100, each section is completely shifting to the nearest scale
note.
• Vibrato—as the value increases, the vibrato depth gets narrower. At a
value of 100, Vibrato is completely eliminated.
• Sense—as the value increases, the range of affecting pitch correction
gets wider.
If you set all of above parameters to a value of 100, you will get a "robot
voice”-type sound.
Current default values are:
• Note: 100
• Vibrato: 50
• Sense: 100
This setup is a bit too artificial. If you want to make the sound more natural,
we suggest the following setup:
• Note: 70-100; be careful of intonation.
• Vibrato: 0-20; try 0, if you'd like to keep the original.
• Sense: 20-30; please adjust to fit the data.
The above suggestion is just one example. Different types of audio might
require different settings.
In addition, try adjusting the Pitch Follow parameter in the Formant Control
section as follows:
• Set the value close to 100 if you'd like to do subtle pitch correction.
• Set close to 0 if you'd like drastic rephrasing.
To Draw Freehand Pitch Changes
1. Click the Pen tool.
2. Draw a shape on the graph.