Instruction Manual

643
Using Control Groups
Mixing
2. Choose Absolute or Relative as the group type and click OK.
SONAR uses the type to determine the range of motion for the group’s
controls.
To Create a Custom Group
1. Right-click on any control in the group and choose Group Manager to
display the Group Manager dialog.
2. Choose Custom as the group type. The starting and ending values for
each control are displayed.
3. To change the starting or ending value for a control, click on the control
in the list and enter new values in the Start and End box.
4. To swap the starting and ending value, click the Swap button.
5. Click Close when you are done.
SONAR uses the type to determine the range of motion for the group’s
controls.
To Adjust the Start Value of a Control
1. Set the control to the desired starting value.
2. Right-click on the control.
3. Choose Set Start = Current.
SONAR sets the start value of the control.
The Set Start = Current and Set End = Current commands set the range
of motion that a grouped control moves through as the other members of
the group move through their starting and ending values. You don’t have to