Instruction Manual

647
Using Remote Control
Mixing
• Set the main volume levels with NRPN messages
• Prevent SONAR from sending any controller messages to your MIDI
device.
• Record automation from an external controller
If you set up remote control for a grouped control, the remote control works
all controls in the group.
The type of MIDI message used to work a control is selected in the Remote
Control dialog box. The options are as follows:
Message
option...
Message effect
on buttons...
Message effect on sliders
and knobs...
None No remote control No remote control
Note On The button state is
toggled
The slider/knob is alternately
maximized and minimized
Note On/Off The button state is
toggled when Note On
is received, and toggled
again when Note Off is
received
The slider/knob is maximized when
Note On is received, and minimized
when Note Off is received
Controller Not applicable The slider/knob value is set to the
controller value
Wheel Not applicable The slider/knob value is set to the
wheel value, with the values
mapped from their original range of
–8,192 to 8,191 to a range of 0 to
127
RPN Not applicable The slider/knob value is set to the
RPN value, with the values mapped
from their original range of 0 to
16,383 to a range of 0 to 127
NRPN Not applicable The slider/knob value is set to the
NRPN value, with the values
mapped from their original range of
0 to 16,383 to a range of 0 to 127