Instruction Manual

648 Mixing
Using Remote Control
To Set Up Remote Control for a Knob, Button, or Fader
1. Right-click on the control and choose Remote Control from the popup
menu.
2. Choose the remote control type, as described in the table above.
3. Set the note or controller number if applicable.
4. Set the MIDI Channel field to the channel that your controller sends out.
5. Click OK.
You can now work the control from your MIDI device. If you click the
Automation Write button on the track strip of the track you are recording on,
you can record your external controller’s knob or fader movements. Make
sure the Automation Write button in the Automation toolbar is enabled.
To Disable Remote Control
• Right-click on the control and choose Disable Remote Control from
the popup menu.
To Prevent SONAR from Sending Controller Data to
Your MIDI Device
• Right-click each knob or fader in SONAR that is sending unwanted
controller data to your MIDI device and choose Disable Control from
the popup menu.
See:
Using the Learn Option
Using the Learn Option
The Learn option in the Remote Control dialog allows you to bind a
parameter in SONAR to a knob or fader on your controller.
To Bind a Control Using the Learn Option
1. Right-click on the parameter you want to arm in either the Track view or
Console view and select Remote Control from the popup menu.
2. Move a knob or fader on your controller.
3. Click the Learn button in the Remote Control dialog and click OK.
The control in SONAR is now bound to the knob or fader on your controller.