Instruction Manual

650 Mixing
Bouncing Tracks
4. Choose Edit-Bounce to Track(s) to open the Bounce to Track(s)
dialog.
5. Select the first destination track for the mixdown.
6. If you’ve saved a preset configuration for the Bounce to Tracks dialog,
select it now in the Preset window.
7. In the Source Category field, select the source you want to use for your
bounced track(s) from the following options:
• Tracks—choosing this option creates new separate tracks for each
track you highlight in the Source Buses/Tracks field. Each track you
highlight will produce a new mono track, stereo track, or two new
mono tracks (the Split Mono option), depending on what you
choose in the Channel Format field.
• Buses—choosing this option creates new separate tracks for each
bus you highlight in the Source Buses/Tracks field. Each bus you
highlight will produce a new mono track, stereo track, or two to
eight new mono tracks (the Split Mono option), depending on
whether the bus is a stereo or surround bus, and depending on
what you choose in the Channel Format field.
• Main Outputs—choosing this option creates new separate tracks
for each main output you highlight in the Source Buses/Tracks
field. Each main output you highlight will produce a new mono
track, stereo track, or two to eight new mono tracks (the Split Mono
option), depending on whether the output is a stereo output or the
Surround Main, and depending on what you choose in the Channel
Format field.