Instruction Manual

652 Mixing
Preparing Audio for Distribution
tracks to audio tracks. Once you have all the stereo wave files you want to
include on your CD, you are ready to burn a CD. Use the Tools-Burn
Audio CD command to burn your tracks to an audio CD.
For step-by-step procedures:
To Export Audio to Wave File Format
Converting MIDI to Audio
To Burn Audio Tracks to an Audio CD
1. Make sure the tracks you wish to burn to CD have been saved as 16-
bit, 44,100 Hz, stereo Wave (.wav) files.
2. Insert a blank CD-R disc in the destination drive.
3. Choose Tools-Burn Audio CD to open the Audio CD Burner dialog
box.
4. Select a destination CD writing drive using the Target Drive dropdown
list.
5. Click Add Track to locate and import the audio Wave files you wish to
burn to CD.
6. Place the tracks in the desired order by using the Move Up and Move
Down buttons.
7. Click Burn CD.
SONAR verifies, performs a layout of the tracks and writes the current track
list to CD medium in the selected drive. After the disk is completed, the disk
is ejected from the drive.
Preparing Audio for Distribution
The File-Export Audio command exports your project as a new file or files
that you can burn to a CD, or distribute via the Web or e-mail. In addition,
SONAR Producer allows you to export surround-encoded files (see
Exporting Surround Mixes). The following export formats are supported: