Instruction Manual

684 Surround Mixing
Surround Effects
See:
Effect Presets
The SurroundBridge
Effect Presets
You can use existing (non-surround) effects presets when you patch an
effect to a surround bus—selecting a non-surround preset sets all of a plug-
in’s instances to the settings of the preset; selecting a surround preset sets
each instance’s parameters individually, according to the information stored
in the preset.
See:
How to Patch and Configure Surround Effects
The SurroundBridge
Effect Property Pages
How to Patch and Configure Surround Effects
For step-by-step instructions, see the following procedures.
To Patch an Effect Into a Surround Bus
• Right-click the FX bin of a surround bus and choose a mono or stereo
effect from the popup menu.
The SurroundBridge patches multiple instances of the effect you chose into
the bus’s FX bin (however, only one effect appears in the bin), with default
assignments of surround channels to plug-in instances.
To Change Channel Assignments for a Patched Effect
1. If the effect’s property page is not open, display it by double-clicking the
name of the effect in the surround bus’s FX bin.
2. On the SurroundBridge tab of the effect’s property page, use the
dropdown menus in the Left Input and Right Input columns to assign
individual surround channels to instances of the effect.
Your assignments take effect immediately, and the names of the tabs in the
property page change to reflect the new assignments.
To Unlink Individual Effect Parameters from Other