Instruction Manual

707
Automation Methods
Automation
2. Press Ctrl+V or use the Edit-Paste command.
The Paste dialog box appears.
3. Choose a track and location to paste to, if you haven’t already.
4. Click OK.
SONAR pastes the automation data and any other types of data you chose
in the Copy dialog box into the track and location you selected.
See also:
Recording Individual Fader or Knob Movements
Creating and Editing Audio Envelopes
Creating and Editing MIDI Envelopes
Drawing Envelopes on Clips
Showing or Hiding Envelopes
Snapshots
Resetting Envelopes and Nodes to Current or
Neutral Values
You can reset an envelope so that it becomes a horizontal line at the
current value of the parameter it controls, which eliminates any curves or
jumps from the envelope. You can reset a node so that it jumps to the
neutral value of the parameter it controls. For example, the neutral value of
the pan parameter is C, or 0%.
To Reset an Envelope to the Current Value
1. Move the Now time to where the envelope’s value is to your liking.
2. Right-click the envelope to display the Envelope Editing menu.
3. Choose Clear All from the menu.
SONAR resets the envelope to the current value.
To Reset a Node to a Neutral Value
Do either of the following:
• Double-click the node.
• Move the cursor over the node until it a cross appears under it, right-
click the node, and choose Reset Node from the popup menu.
The node jumps to the neutral value for the parameter it controls.