Instruction Manual

794 Instrument Definitions
Creating Instrument Definitions
See also:
Copying Name Lists
Assigning the Bank Select Method
Assigning Patch Names
Assigning Note Names
Assigning Controller, RPN, and NRPN Names
To do this… Do this…
Create a new name
list
Duplicate an existing Patch Names or other list by
doing one of the following: expand the folder that
contains the name list, highlight the name list and
press the Ins (Insert) key; highlight the folder and
press Shift-Insert; or right-click any folder or name
list and choose Add Names List from the menu.
Then type a name for the list and press Enter.
Delete a name list Highlight the names list and press the Del (Delete)
key; or right-click on the name list and choose
Delete from the menu. You will see a warning if the
list is used by any instrument definition. If you delete
the list anyway, the instrument definition will change
automatically.
Add the next item in
a name list
Highlight a name and press the Ins key, or right-click
on a name and choose Add Name from the menu.
Then enter the name.
Add a name
anywhere in a list
Highlight the name of a list and press Shift-Insert, or
right-click on the name of a list and choose Add
Name from the menu. Then enter the name.
Delete names from a
list
Highlight the Names List or Name, and press Del.
You can also right-click, then choose Delete.
Edit a name in a list Highlight the name or name list and press F2, or
right-click and choose Edit from the menu. Then
enter the new name.