Instruction Manual

812 System Exclusive Data
Sending Sysx Banks at Startup
Editing Sysx Banks
Sending Sysx Banks at Startup
Real-time Recording of System Exclusive Messages
Transmitting Banks During Playback
Sysx View Buttons
Sending Sysx Banks at Startup
You can tell SONAR to send certain Sysx banks to your instrument(s) each
time you open the project file that the banks are in.
To Send Sysx Banks at Startup
1. In the Sysx view, select a bank that you want to send to an instrument
when you open the current project.
SONAR highlights the bank you select.
2. Click the Auto Send Bank button .
A checkmark appears next to the bank name in the Auto column to
show that the bank is marked for auto-sending.
3. While the bank is still highlighted, click the Output button to open the
Sysx Bank Output dialog.
4. Enter the number of the output you want to send this bank out through,
and click OK.
The output number you entered appears next to the selected bank in
the Output column.
5. Repeat steps 1-4 for each bank you want to send, and save your
project.
The next time you open a project, SONAR asks you if you want to send any
Sysx banks in the project that are marked for auto-sending. If you click OK,
SONAR sends the bank(s).
If you want SONAR to send auto-send banks every time you open a project
without asking you, uncheck the checkbox in the Auto-Send Sysx dialog
that says Ask this question every time. If you decide later that you want to
be asked, use the Options-Global command to open the Global Options
dialog, click the General tab, and check the checkbox that says Ask Before
Sending System Exclusive (When Opening Projects).