Instruction Manual

888 External Devices
ACT MIDI Controller Plug-in
(the WAI display, (see The WAI Display for more information) in SONAR’s
interface.
If you selected the ACT MIDI Controller plug-in or the Cakewalk Generic
Surface plug-in for your controller/surface, you can load a default set of
mappings by opening the property page for either plug-in, and selecting the
name of your controller/surface from the Presets window in the property
page.
See also:
To Use ACT with the ACT MIDI Controller Plug-in
To Disconnect a Controller/Surface from SONAR
1. Use the Options-Controllers/Surfaces command to open the
Controllers/Surfaces dialog.
2. In the controller/surface column, click the name of the controller/surface
that you want to disconnect.
3. Click the Delete button , which deletes the name of the controller/
surface that you selected.
4. Click Close.
See:
ACT MIDI Controller Plug-in
Cakewalk Generic Surface Plug-in
The WAI Display
ACT
ACT MIDI Controller Plug-in
The ACT MIDI Controller plug-in can be configured to support any generic
MIDI controller (controller/surface), such as the JL Cooper FaderMaster,
Peavey PC-1600, and Kenton Control Freak. Generic controllers/surfaces
typically have 8-16 strips of faders/knobs/buttons, are non-motorized, and
can often be configured to transmit any MIDI message (continuous
controllers, NRPNs, Sysx, etc.). The ACT MIDI Controller supports ACT.
After you have connected your controller/surface, and selected the ACT
MIDI Controller plug-in in the Controllers/Surfaces dialog (see Connecting