Instruction Manual

891

ACT MIDI Controller Plug-in

External Devices

Assigning Controls on Your Controller/Surface

to Cells in the ACT MIDI Property Page

Each cell or field on the Controllers tab of the ACT MIDI Controller property

page lists the SONAR or plug-in parameter that is currently controlled by

that cell. However, if your controller/surface does not have a preset, no

knobs or sliders on your controller/surface will be assigned to that cell, or

the knobs may be assigned in a pattern that you don’t prefer.

If your controller/surface does not have a preset, or if you want to change

the knobs and sliders that control specific cells in the ACT MIDI Controller

property page, use the MIDI Learn function to assign knobs and sliders to

cells:

To Assign Controls on Your Controller/Surface to Cells

in the ACT MIDI Controller Property Page

1. Click the cell on the Controllers tab of the ACT MIDI Controller property

page that you want to control with a specific knob or control on your

controller/surface. You can assign knobs to cells that do not currently

list any SONAR or plug-in parameter.

The cell displays the MIDI Learn message.

2. Move the control on your controller/surface that you want to use to

control that cell. This assigns the control to the cell.

3. You can edit the cell label by clicking the label and entering a new name

in the Edit Label dialog. This way you can immediately see which knobs

or sliders on your controller/surface are controlling which cell in the ACT

MIDI Controller property page.

4. Repeat steps 1-3 for all the cells you want to control. Remember, you

can assign controls to cells that do not currently list any SONAR or

plug-in parameters.

5. When you are finished assigning controls to cells, save your work as a

preset: choose a preset or type a new name in the Presets window, and

click the Save button (floppy disk icon) that’s next to the Presets

window.