Instruction Manual

903
Cakewalk Generic Surface Plug-in
External Devices
• On/Off—This option is currently only used with the Forward >> and
Rewind << shuttle actions. You should only assign buttons to these
functions if each button sends a different MIDI message when it is
released from the message it sends when it is pushed. The On field
displays the value the button sends when you push it, and the Off field
displays the value the button sends when you release it.
Global Parameters
This section let's you assign buttons and knobs to control SONAR’s
transport. The parameters you can control are:
•Play
•Stop
•Forward >>
• Rewind <<
• Record
• Write Automation
• Jog <- (previous measure)
• Jog -> (next measure)
• Move 1 Left—This parameter changes the currently-controlled track to
the next lower-numbered track.
• Move Bank Left—This parameter changes the currently-controlled bank
of tracks to the next lower-numbered bank of tracks.
• Move 1 Right—This parameter changes the currently-controlled track to
the next higher-numbered track.
• Move Bank Right—This parameter changes the currently-controlled
bank of tracks to the next higher-numbered bank of tracks.
Presets
After you have carefully configured the Cakewalk Generic Surface property
page to work with your control surface, you will likely want to save the
configuration as a preset.
To Save a Preset
• Type a name in the Preset box, then click the Save (floppy disk) button.