Instruction Manual

913
Working with StudioWare
External Devices
the mouse click.
To adjust a knob or slider using the keyboard:
• Press the - and + keys to decrease or increase the value of the selected
control by the smallest amount
• Press the [ and ] keys to decrease or increase the value of the selected
control by steps of 10
Grouping Controls
SONAR lets you create groups of StudioWare controls. When several
controls are in a single group, you can move a single control and have the
remaining controls in the group adjust automatically. This is useful for many
different mixing and crossfade applications.
When you create a group of controls, each control in the group has a
starting and an ending value. Here’s how these values are used:
• When you move any control in the group to its starting value, all
controls in the group are set to their starting value
• When you move any control in the group to its ending value, all controls
in the group are set to their ending value
• When you position any control in the group somewhere between its
starting and ending value, all controls in the group are set to the same
relative position between their starting and ending value
The initial range for each control is set based on the position of the controls
at the time you group them.
You can adjust the range for any individual control, even if it is part of a
group, simply by holding the Shift key while you move the control. When
you adjust an individual control by holding the Shift key, its maximum or
minimum is adjusted, depending on whether the entire group is closer to its
minimum or maximum value.
To Create a Group of Controls
1. Select any control by clicking on it with the mouse.
2. Hold down the Ctrl key and click on one or more additional controls.
SONAR creates a group from the selected controls.
To Remove Controls from a Group
1. Hold down the Ctrl key and click on any control in the group.
SONAR removes the control from the group.