Instruction Manual

918 External Devices
Working with StudioWare
To Record a Snapshot While Playback Is in Progress
1. Make sure the button in the StudioWare toolbar is not pressed so
that Update is disabled.
2. Change the Now time to a few bars or seconds before the time you
wish to take the snapshot.
3. Start playback.
4. When you have reached the appropriate time, click on the Snapshot
button.
SONARHome Studio records a snapshot of the current control settings.
To Record Control Changes in Real Time
1. Make sure the button in the StudioWare toolbar is pressed so that
Update is enabled.
2. Make sure the button in the StudioWare toolbar is pressed so that
recording is enabled.
3. Set the Now time to a few bars or seconds before the time at which you
want to record control movements.
4. Click or press the Space bar to start playback. (Note: Do not press
the Record button in the Transport toolbar!)
5. Adjust the controls as you wish while playback is in progress. Each time
you adjust a control, the Record tool is activated.
6. When you are done, click or press the Space bar to stop playback.
7. Click the button in the StudioWare toolbar to turn off real-time
recording.
SONARHome Studio records the control changes that you entered while
playback was in progress.
Control Settings
The controls in a StudioWare panel are designed to send and receive
various types of MIDI information. This information can be transmitted to
two possible destinations:
• A specific track in your project
• A MIDI output