Instruction Manual

926 Troubleshooting
Audio Distorts at Greater than 16 Bits
No Sound from My Soft Synth
My Pro Audio 9 Files Sound Louder/Softer When I Open Them in SONAR
SONAR Can’t Find the Wavetable Synth or MPU401
I Get an Error Message When I Change a Project to 24-bit Audio
Bouncing Tracks Takes a Long Time
The GUI is not Smooth During Playback
Audio dropouts or crash when playing
back large files at maximum latency
Symptom: after several seconds of playback the audio begins to cut out,
although the transport appears to keep rolling. If the project file is loaded
with several plug-ins you may experience a crash.
Solution: if you ever set the Buffers Size field on the General tab of the
Audio Options dialog so that the buffer size exceeds the disk buffer size,
audio won't play properly. If you want latency that high you must also
increase the disk buffer size: in the Audio Options dialog, on the Advanced
tab, try increasing the I/O Buffer Size (KB) field by blocks of 128 KB.
More Frequently Asked Questions.
When I Play a File, I Don’t Hear Anything
Open a project (.CWP) and click the Play button. If you don’t hear any music,
try the following suggestions:
Possible problem… What to do…
Your speakers aren’t connected
properly or the volume is turned
down.
Make sure your speakers are on and
the volume is turned up.