Instruction Manual

929
Troubleshooting
If none of these suggestions works, check our web site for additional
suggestions or contact technical support.
More Frequently Asked Questions.
When I Play a File Containing Audio, the
Audio Portion Doesn’t Play
Open a bundle file (.CWB) and click the Play button. Do you hear the audio
tracks in the project (there may be MIDI tracks in the bundle file, so you
must mute them). If not, try the following:
SONAR is not receiving MIDI data. Check the MIDI Input/Output Activity
monitor on the Windows Status
bar. Check to see if the left LED is
flashing red. If not, then SONAR is
not receiving MIDI data. Check you
connections and try again.
You have not set up SONAR to
record.
Make sure that 1) you have chosen
an input for the track; 2) you have
armed the track for recording; and 3)
you have pressed the Record button,
and not the Play button.
Possible problem… What to do…
Your speakers aren’t connected
properly, or the volume is turned
down.
Make sure your speakers are
connected properly and the volume
is turned up.
Possible problem… What to do…