Instruction Manual

946 Hardware Setup
Set Up to Record Digital Audio
Home Stereo, CD Player, Radio Tuner, Preamp Output
The output of a stereo component can be connected to the sound card’s
line in, using a dual RCA to 1/8” stereo mini Y-adapter. Many portable
cassette players come with this kind of adapter, or even with a single cable
with all the necessary jacks. In the following diagram, a stereo component
is connected to the Y-adapter using standard RCA cables:
Internal CD Player
If you are using your computer’s internal CD player, and it does not have its
audio outs connected internally to the sound card, run a cable from the CD
player’s Headphone jack to the card’s Line In jack. If there is no Headphone
jack, you’ll need to use an external CD player.
Mixer
You can connect a mixer to the sound card with a setup of the following
kind: