Instruction Manual

955
Initialization File Format
Initialization Files
WavePreviewInputBuffers
=<1-4> )
Integer 4 This variable allows control of the
number of Waveform preview input
buffers. The input buffers allow more
efficient access to the recorded
meter history on disk, and greatly
speeds up performance access to
previews while zooming and
scrolling the clips view when
waveform preview is active. You can
control the actual number of history
page buffers with this variable. This
value is an integer and the minimum
value is 1 and the default is 4
buffers. 2-4 buffers should be
sufficient for most usage scenarios.
Each buffer consumes approx32K
per preview track. Lower values
consume less memory but may
cause more disk access when
scrolling or zooming large projects
when preview is active.
DrawPlayingAudio=< 0 or
1>
Boolean 0 (disable) This line controls whether the audio
waveform is redrawn or not when
the display is scrolling during
playback. By setting the value to 1,
you can force the Track view to
always redisplay audio data, even
during playback. This is
recommended only for very fast
machines.
HyphenDir=<drive:path
name>
Path <installation
directory>\ttshyph.dll
This determines the location of the
Hyphenator extension DLL used by
SONAR, and is written during
installation. This should never need
to be changed.
PanelsShowWidgetBitmap
s= <0 or 1>
Boolean 1 (enable) This line controls whether SONAR
hides (n=0) or shows (n=1) all
widget bitmaps while in Use mode
(except those in Image widgets).
Variable... Type... Default value... What it does…