Instruction Manual

957
Initialization File Format
Initialization Files
VelocityAutoshrinkWidth=<
0 or 1>
Boolean 0 If you set this to 1, solid velocity tails
will become narrower by one pixel if
the vertical zoom is such that notes
are less than 5 pixels high. For
example, with:
[Wincake]
VelocitySolidWidth=2
VelocityAutoshrinkWidth=1
you get bigger velocity tails (ala
SONAR 4) when the notes are big
enough to edit, but really thin
velocities tails when the notes are
too small to edit.
VelocityAsBargraph=<0 or
1>
Boolean 0 By default, note velocity tails are
displayed as thin vertical lines in the
Piano Roll view, and the color is the
same as note events. If “Notes/
Velocity” is not the current edit type,
this color will be slightly lightened.
To override this and use bar graph
indicators for velocity tails, add the
following line to the WinCake
section:
VelocityAsBargraph=1
VelocityBargraphFullWidth
=<0 or 1>
Boolean 0 When displaying velocity tails as bar
graphs (see above), you can specify
whether the velocity tails should be
fixed at 3 pixels wide (default), or
extend the full width of the note
event. To display full-width velocity
tails, add the following line to the
WinCake section:
VelocityBargraphFullWidth=1
Variable... Type... Default value... What it does…