Instruction Manual

967
Initialization File Format
Initialization Files
GapDezipperUsec=<0-1000> Integer 500 The audio engine will now
render a smooth fade in
whenever audio playback is
interrupted and there is a abrupt
transition in gain. The purpose
of doing this is to dezipper
(smooth out) the gain transition
due to the discontinuity. For
example, if you click on the time
ruler to jump to a new time
location during playback, the
engine will smoothly render the
transition to the new gain level
as a fade in. This smoothing
also takes place whenever
playback gapping occurs. You
can control the fade in time via
the GapDezipperUsec variable,
which is expressed in
microseconds per dB and
controls the speed of the fade in
to the new gain value. (default =
500 microseconds. i.e. the fade
will take 500 microseconds per
change in dB at the transition
point). You may increase or
shorten the time of the fade by
increasing or decreasing this
value. The normal legal value
range for this variable is 0 to
1000 microseconds.
This variable should be set in
the [Wave] section. A value of
zero turns off dezippering on
gapping completely.
Variable... Type... Default
Value...
What it does…