Instruction Manual

970 Initialization Files
Initialization File Format
DefaultEqPosition=<0 or 1>
(Producer Edition only)
Boolean 0 The integrated channel EQ is
pre FX bin by default, but you
can change the position of any
channel EQ by right-clicking the
EQ plot and choosing the
desired position from the
context menu.
The ‘DefaultEqPosition’
AUD.INI
variable lets you specify the
default EQ position for all new
tracks/buses. This variable lives
in the [Aud] section of
AUD.INI,
and legal values are: 0 (pre FX)
or 1 (post FX).
BounceBufSizeMsec=< 0 to
350>
Integer 0 This is a line in the Wave
section of the AUD.INI file that
sets the buffer size for bouncing
tracks. At a value of 0, the
bounce buffer is the same size
as the Mixing Latency value
that you set in the Audio
Options dialog. If you find that
bouncing tracks, especially with
certain soft synths, takes a very
long time, you can set this value
to 100, or some value between
0 and 350 so that the bounce
buffer will use a more efficient
size for bouncing, which has
different requirements from
normal playback latency.
Note: on larger projects, setting
this variable to a large value
can cause out-of-memory
errors.
Variable... Type... Default
Value...
What it does…