Reference Guide

1003
Insert Send Assistant
New features in SONAR 8.5
the headphone mix matches the main mix, and from there you can adjust the headphone mix as
desired.
New bus options
When you select New Bus, the following settings can be configured:
Stereo. This option lets you assign a new send to a new stereo bus.
Surround. This option lets you assign a new send to a new surround bus.
Bus Output. Specify the desired output for the new bus. The drop-down list shows all available
output destinations.
Bus Name. Specify the desired name for the new bus. This name will be shown in the Track view
and Console view.
Choose Effect. Click the button to choose the desired effect plug-in to insert on the new bus.
When an effect has been selected, the plug-in name is displayed on the button face.
Show Effect Property Page. When Show Effect Property Page is selected, the chosen effect
plug-in’s user interface (UI) appears when you click OK to close the Insert Send Assistant dialog.
To insert a send to an existing bus
1. Right-click on a track or bus and select Insert Send > Insert Send Assistant from the pop-up
menu.
The Insert Send Assistant dialog opens.
2. Click Send to Existing Bus and select the desired bus from the drop-down list.
3. Click OK to close the Insert Send Assistant dialog.
A new send is inserted and assigned to the specified bus.
To insert a send to a new stereo bus
1. Right-click on a track or bus and select Insert Send > Insert Send Assistant from the pop-up
menu.
The Insert Send Assistant dialog opens.
2. Under New Bus Options, select Stereo and specify any other desired options (see New bus
options).
3. Click OK to close the Insert Send Assistant dialog.
A new send is inserted and assigned to the new bus.
To insert a send to a new surround bus
1. Right-click on a track or bus and select Insert Send > Insert Send Assistant from the pop-up
menu.
Note: The Match Track’s Pan and Gain setting does not affect sends that are assigned to
surround buses.