Reference Guide

1096
Cyclone
Using Cyclone
Loop Editing
Keyboard Shortcuts in Cyclone
Controlling Individual Pads—Volume, Pan, Mute, Solo, Sync,
Looping, and Content
Each Pad has the following controls:
• Volume knob. Turn to adjust.
• Pan knob. Turn to adjust.
• Folder icon. Click this to import a loop to an individual Pad.
• Mute button. Click this to mute or unmute the loop that’s assigned to an individual Pad.
• Solo button. Click this to solo or un-solo the loop that’s assigned to an individual Pad.
• Sync button. Click this to synchronize (or unsynchronize) the Pad’s loop to SONAR‘s pitch and
tempo.
• Loop button. Click this to cause or prevent the Pad’s loop from repeating indefinitely between
its track length markers that are in the Pad Editor.
To Export a Sound Bank
1. Click the Export Sound Bank button in the Cyclone toolbar.
The Save As dialog appears.
2. Navigate to the directory where you want to save the Sound Bank.
3. Enter a name for the Sound Bank.
4. Click OK.
Cyclone saves your Sound Bank. All wave files assigned to pads are saved. You can choose that
Sound Bank in any Cyclone project SONAR automatically saves your current Cyclone settings, so
you do not need to save a Sound Bank unless you want to use these settings in a different project.
To Import a Sound Bank
1. Click the Import Sound Bank button on the Cyclone toolbar.
The Open dialog appears.
2. Navigate to the directory where you saved your Sound Bank, select it and click OK.
Cyclone loads the loops and associated settings that make up the Sound Bank you loaded.
To Clear the Contents of a Project
• Click the Trash icon in the Cyclone toolbar.
Cyclone deletes all loops from your project.
Mixing Down Cyclone