Reference Guide

1174
Menu Reference
Set Snap-to = Current
Set Snap-to = Current
This command, which you find by right-clicking a fader or knob in the Console or Track views, sets
the snap-to position of that fader or knob to its current value. When you double-click a fader or knob,
it jumps to its snap-to position.
For more information about the Console view, see Preparing to Mix.
90 dB Range
This command, which you find by right-clicking any audio meter in the Track view or Console view,
changes the range that the meter measures to 90 dB.
For more information about meters, see Metering.
78 dB Range
This command, which you find by right-clicking any audio meter in the Track view or Console view,
changes the range that the meter measures to 78dB.
For more information about meters, see Metering.
60 dB Range
This command, which you find by right-clicking any audio meter in the Track view or Console view,
changes the range that the meter measures to 60 dB.
For more information about meters, see Metering.
42 dB Range
This command, which you find by right-clicking any audio meter in the Track view or Console view,
changes the range that the meter measures to 42 dB.
For more information about meters, see Metering.