Reference Guide

1294
Dialog Reference
Controller/Surface Settings dialog
slowly at first, but much faster toward the end of the crossfade.
• Linear Crossfade. This option causes the selected audio to change volume at a constant rate
throughout the crossfade.
Crossfade graph
The crossfade graph illustrates any type of crossfade you choose in the Name field, but you can also
drag points on the graph to create any shape you want.
Reset button
Click this button to reset the crossfade graph to the shape that is selected in the Name field.
For step by step directions, see Fades and Crossfades.
Controller/Surface Settings dialog
The Ctrl Surface Settings dialog appears when you click the Property Page button in the
Controllers/Surfaces dialog. This dialog allows you to choose inputs and outputs for the selected
control surface.
The Controller/Surface Settings dialog has the following fields:
• Control Surface. This field lists the control surface you are choosing inputs and outputs for.
• Input Port. Click the name of the input port you want to use.
• Output Port. Click the name of the output port you want to use.
For more information, see:
External Devices
Customize Toolbars dialog
The Customize Toolbars dialog appears when you right-click a toolbar, and choose Customize
from the pop-up menu.
The Customize Toolbars dialog has the following fields:
• Available Toolbar Buttons menu. This menu lists the buttons on all toolbars, and a separator
that you can add between buttons. Click an item in the menu, and then click the Add button to
add the item to the current toolbar.
• Add button. Click this to add the highlighted item in the Available Toolbar Buttons menu to
the Current Toolbar Buttons menu.
• Remove button. Click this to remove the highlighted item in the Current Toolbar Buttons
menu from the Current Toolbar Buttons menu.