Reference Guide

1301
Dump Request Macro needs your input—Channel/Unit Number
Dialog Reference
note.
• Vel+. Apply a velocity offset setting to an individual mapped pitch.
• V Scale. The V Scale value sets a level of compression or expansion. A value below 100% is
compression. A value above 100% is expansion.
Port/Channel Pairs
This section lists each unique Port and Channel pairing. This allows you to make quick global
changes that Port and Channel pairing’s bank and patch settings.
Dump Request Macro needs your input—Channel/
Unit Number
When you click the Receive button in the Sysx view, and choose to receive sysx data from a
synthesizer your system has trouble identifying, the Dump Request Macro needs your input
dialog box appears. This dialog box, which appears if the system needs more information and you
have two or more of the same synthesizer, lets you specify which channel or unit number you want
dumped.
See also:
Using the System Exclusive View
Dump Request Macro needs your input--Patch/
Voice/Config Number
When you click the Receive button in the Sysx view, and choose to receive sysx data from a
synthesizer your system has trouble identifying, the Dump Request Macro needs your input
dialog box appears. This dialog box, which appears if the system needs more information, lets you
specify which patch, voice, or config number you want dumped.
See also:
Using the System Exclusive View
Duration dialog
When you use the Transport > Step Record command, the Step Record dialog box appears,
which contains two Other buttons. Clicking the one on the Duration side of the dialog box opens the
Duration dialog box. In the Duration field, enter the actual duration of the note you want to enter in
Ticks.