Reference Guide

1403
Set Default Velocities for Steps dialog
To Select Partial Clips Using Time Ranges and Tracks
Set Default Velocities for Steps dialog
Open the Set Default Velocities for Steps dialog by right-clicking to the right of any row in the Step
Sequencer and selecting Set Default Velocities for Steps from the pop-up menu.
From the Set Default Velocities for Steps dialog you select the default velocity value that is
assigned to new notes that are enabled in the Step Sequencer. The setting is global, which means it
applies to all step sequencer clips and projects.
Select Fretboard Track dialog
Open the Pick Fretboard Track dialog box by right-clicking in the Fretboard pane and selecting
Select Track from the Fretboard pop-up menu.
From the Pick Fretboard Track dialog box you select the track you want to see displayed in the
fretboard pane if multiple tracks are displayed in the Staff pane.
To select a track, click the track in the Pick Fretboard Track dialog and click OK.
See Also:
The Fretboard
Set Timecode at Now Time
The Transport > Set Timecode at Now command opens the Set Timecode at Now Time dialog
box, which allows you to move the SMPTE time 00:00:00:00 to the current Now time. If you enter a
value in the dialog, the SMPTE value that you enter is set to the current Now time.
Slide dialog
The Process > Slide command opens the Slide dialog box, which allows you to move track data
forward or backward in the track.
The Slide dialog box has the following fields:
Slide
Choose what kinds of track data you want to move:
• Events in Tracks. Events include notes and controller data but not markers.