Reference Guide

1419
Track Manager dialog
Amount
Fill in the number of half-steps that you want SONAR to transpose the track. Positive numbers
transpose the track up; negative numbers do the opposite.
See also:
Adjusting the Key/transposing a track (Key+)
Track Manager dialog
Clicking the Track Manager button or pressing M in the Track view or Console view opens the
Track Manager dialog box. Use this dialog box to hide or display the various track modules and
buses in the view that you opened it from.
The Track Manager dialog box has the following fields and buttons:
• Display window. This window lists all the track and bus modules. A checkmark next to a
module means it is visible.
• Toggle buttons. These buttons select all of the type of module that is listed on the button. You
can check or uncheck all selected modules by clicking one of the selected modules.
See also:
To Choose the Tracks that are Displayed Using the Track Manager
Track Name dialog
The Tracks > Property > Name command opens the Track Name dialog box, which you use to give
a highlighted track a name.
The Track Name dialog box has only the following field:
Name
Type the name that you want to give to the highlighted track, and click OK.
Track Outputs dialog
The Tracks > Property > Outputs command opens the Track Output dialog box, which you use to
assign a highlighted track to a MIDI or audio output.
The Track Output dialog box has only the following fields: