Reference Guide

1471
Step Sequencer View
View Reference
• Type. Choose the type of controller you want to add (for example, choose Control if you want
to edit volume).
• Value. This field is unavailable if you choose Wheel or ChanAft in the Type field. If you
choose Control, RPN, or NRPN in the Type field, choose which Control, RPN, or NRPN you
want to add. For example, to edit volume, choose 7-Volume in this field if you chose Control in
the Type field.
• Channel. Choose a MIDI channel for the controller event.
3. Do one of the following:
• To draw a single controller event. Click in the Controllers pane.
• To draw a series of controller events. Drag in the Controllers pane.
• To draw a straight line. Hold down the CTRL key and drag in the Controllers pane.
• To adjust all existing events. Hold down the SHIFT key and drag in the Controllers pane.
• To erase controller events. Right-click an existing controller event.
The edits are applied to all selected rows.
To create a smooth slide (portamento) between pitches
1. Click a row’s Select button.
The Controllers pane appears below the row.
2. Click the Step Editor control and select Slide/Portamento from the drop-down menu.
3. Draw events in the Controller pane where you want to create a slide. The Slide/Portamento
value specifies the time it takes for the next note to reach its pitch. The value range is 0 (off) to
127 (longest).
See:
Controllers pane
Working with rows
Working with steps
Working with patterns
Working with Step Sequencer clips
Working with patterns
To create a brand new pattern
To edit an existing pattern
To save a pattern
To load a pattern
To preview a pattern