Reference Guide

1494
View Reference
Loop Construction view
Another example: The clip pitch is E. The desired clip pitch is D. If the Follow Project Pitch option
is not checked, and a value of “2” is entered in the Pitch (semitones) field, the clip is transposed
down two semitones to D from the original pitch of E.
Pitch Field (fine)
The Pitch (fine) field allows you to make tuning adjustments or to transpose the pitch of a clip up to
50 cents. There are 100 cents in one semitone. A Pitch (fine) setting of 1 adjusts the pitch up one
hundredth of a semitone. The Pitch (fine) option can “fine tune” a slightly out of tune clip so that it is
in pitch with the remaining clips in a project.
Stop Preview Button
The Stop Preview button stops loop playback.
Preview Loop Button
Plays the current loop repeatedly. Use the Stop Preview control to stop playback.
Enable Slice Auto Preview
Turns on slice auto preview.
Slice Auto Preview
This control appears grayed out unless the Enable Slice Auto Preview option is on. This option
loops the slice auto preview.
Preview Bus Field
Select the output through which you want to listen to the clip.
Clip Properties
The Properties button opens the Clip Properties dialog.
Select Tool
Use the Select tool to move markers in the Markers bar.
Erase Tool
Use the Erase tool to delete markers in the Markers bar.
Default All Markers Tool
The Default All Markers tool restores all automatically generated markers to the original position
and enables all those that were disabled. Manually created markers remain as is.