Reference Guide

1506
View Reference
Matrix view
see To use independent Loop mode per cell.
• Latch mode. Each cell has a Latch Mode button, which lets you override the Global Latch
Mode setting. By default, each cell inherits the Global Latch Mode setting. When a cell’s Latch
Mode toggle is enabled, the cell will no longer follow the Global Latch Mode setting. For details,
see To use independent Latch mode per cell.
You can right-click a cell to access the following commands:
• Rename Cell. Use this command if you want to rename the cell.
• Clear Cell. Use this command to remove any pattern and MIDI assignment from the cell.
• MIDI Learn. Use this command to assign a MIDI event to a cell, which allows you to trigger the
cell via MIDI remote control. The MIDI Learn command shows a check mark if the cell is already
in MIDI Learn mode, and shows an asterisk (*) if there is already a MIDI event assigned to the
cell.
• Clear MIDI Mapping for Cell. Use this command to remove any MIDI assignment from the cell.
The cell will no longer be triggered via MIDI remote control.
• Clear MIDI Mapping for All. Use this command to remove any MIDI assignments from all cells
in the Matrix view. Cells will no longer be triggered via MIDI remote control.
In addition to a mouse, you can use the computer keyboard to navigate between cells:
• Use the ARROW keys to move focus to another cell that contains data.
• Press ENTER to trigger the cell that has focus.
• Press DELETE to clear the cell that has focus.
See:
To assign a pattern to a cell
To assign multiple patterns to subsequent columns
To remove a pattern from a cell
To specify how soon a pattern should start playing after being triggered
To start a pattern from its beginning
To synchronize a pattern with the project’s Now time
Note: After a cell’s Loop Mode button has been engaged, the cell will no longer continue to
follow the Global Loop Mode setting, even if you disable the cell’s Loop Mode button. To
restore the link to the Global Loop Mode setting, hold down the CTRL key and click the cell’s
Loop Mode button.
Note: After a cell’s Latch Mode button has been engaged, the cell will no longer continue to
follow the Global Latch Mode setting, even if you disable the cell’s Latch Mode button. To
restore the link to the Global Latch Mode setting, hold down the CTRL key and click the cell’s
Latch Mode button.