Reference Guide

200
Controlling Playback
Changing track settings
To change a track name
1. Double-click on the current track name.
2. Enter the new track name.
3. Press ENTER.
The default track names (Track 1, Track 2, etc.) are not actually names, but placeholders until you
name a track. If you reorder the tracks these placeholders change.
You can rearrange and resize the panes in the Track view as shown in the following table:
You can customize which tracks are displayed or not displayed, and enlarge or maximize individual
tracks while other tracks remain minimized. You can also manually set the exact size of a track’s
display. The following table shows how to customize the appearance of tracks in the Track pane:
Reverb Adds MIDI reverb effect to the track
Snap to Scale scale type Displays current scale for Snap to Scale feature
Snap to Scale root note Displays root note of current Snap to Scale scale
Snap to Scale on/off Turns Snap to Scale feature on or off
To do this Do this
Change the width of the Track pane and Bus pane Drag the divider that separates the Track pane from the
Clips panes to the left or right
Change the height of the Mains/Buses pane Drag the divider that separates the Track and Clip panes
from the Bus pane up or down
Table 32.
To do this Do this
Hide or show a track Open the Track Manager dialog (press M), and check or
uncheck a track’s check box in the dialog.
Maximize a track Click the Maximize button in the track
Restore a track to its original size (before it was
minimized or maximized)
Click the Restore button in the track
Minimize a track Click the Minimize button in the track
Table 33.
Parameter What it means
Table 31.