Reference Guide

201
Changing track settings
Controlling Playback
You can display subsets of the Track pane’s interior controls (the titlebar controls are always
displayed) by selecting one of the tabs located at the bottom of the Track view. To choose which
controls are displayed on each tab, see “To Configure Track and Bus Tabs” on page 298.
Changing audio track settings in the Track pane
You can change the values in the Track pane in a number of ways:
Changing MIDI track settings in the Track pane
Change the height of a track using splitter bars Move the cursor over the gap below a track until the
cursor looks like this . Click and drag until the track is
the size you want.
Lock or unlock the height of a track Right-click an empty area in the track’s controls and
choose Lock Height from the menu.
Control How to change the setting
Volume, Pan, Volume Trim, Send
Output Level, and Send Pan
Click on the control and move your cursor left or right to adjust values,
or press ENTER and type a value.
Input and Output Click on the black arrow on the right of the control and select a driver
from the menu that appears, or double-click on the control and select a
driver from the menu.
Buttons Click to enable or disable
Table 34.
Control How to change the value
Channel Click on the black arrow on the right of the control and select a channel from the
menu that appears, or double-click on the control and enter a value.
Bank Click on the black arrow on the right of the control and select a bank from the
menu that appears, or double-click on the control and enter a value.
Patch Click on the black arrow on the right of the control and select a patch from the
menu that appears, or double-click on the control and enter a value.
Volume, Pan, Volume Trim,
Chorus and Reverb
Click on control and move your cursor left or right to adjust values, or double-
click on the control and enter a value.
Table 35.
To do this Do this
Table 33.