Reference Guide

248
Recording
Input quantizing
• To turn input quantizing on or off for all tracks, make sure no tracks are selected (or press
CTRL+A to select all tracks), then use the Tracks > Input Quantize > Enable/Disable Input
Quantize command, or click the Enable/Disable Input Quantize button in the Record toolbar.
To set the resolution
• To set the resolution for a single track, click the track’s Input Quantize resolution menu, and
choose a resolution from the drop-down menu that appears. You can also click Quantize
Settings in the resolution menu to open the Input Quantize dialog, and type a number of ticks in
the Resolution field.
• To set the resolution for selected tracks, select the tracks that you want to configure, then use the
Tracks > Input Quantize > Quantize Settings command or click the Quantize Settings button
in the Record toolbar to open the Input Quantize dialog. Then choose a value in the Resolution
field, and click OK.
• To set the resolution for all tracks, deselect all tracks (or select all tracks), then use the Tracks >
Input Quantize > Quantize Settings command or click the Quantize Settings button in the
Record toolbar to open the Input Quantize dialog. Then choose a value in the Resolution field,
and click OK.
To set options
• To set options for a single track, click the track’s Input Quantize resolution menu, and choose
Quantize Settings to open the Input Quantize dialog, or right-click the Resolution menu. Then
choose options in the dialog, and click OK.
• To set options for selected tracks, select the tracks that you want to configure, and use the
Tracks > Input Quantize > Quantize Settings command or click the Quantize Settings button
in the Record toolbar to open the Input Quantize dialog. Then choose options in the dialog, and
click OK.
• To set options for all tracks, deselect all tracks, then use the Tracks >Input Quantize > Quantize
Settings command or click the Quantize Settings button in the Record toolbar to open the Input
Quantize dialog. Then choose options in the dialog, and click OK.
Visual indicators
You will see the following visual indicators when Input Quantizing is enabled:
•The Enable/Disable Input Quantize button in the Record toolbar changes.
Note: To quantize to a custom resolution value, open the Input Quantize dialog, and type a
custom number of ticks in the Resolution field.
Note: To get explanations of the options in the Input Quantize dialog, press F1 when the
dialog is open.